Outgoing mail only routes to ISP domain (Full Version)

All Forums >> [Microsoft Exchange 2003] >> Message Routing



Message

atledale -> Outgoing mail only routes to ISP domain (26.Jun.2007 2:22:26 AM)

I just setup my home Exchange server (have done this before), and my server can receive mail through my firewall (DLink DFL-700), but I can only send e-mail internally and to my own e-mail address, which is in a domain hosted by the ISP I use for my Internet. All others stay in the que.

If I telnet to the server using port 24, I don't get full contact, it seems. This is what it says:

220 2003entad.atles.com Microsoft ESMTP
dy at  Tue, 26 Jun 2007 08:21:29 +0200

Anyone got any suggestions on this?



ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 2:31:48 AM)

Why port 24, and why not port 25?



sharma.satyajeet -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 2:34:08 AM)

Some more information is required in order to understand the problem. i.e do you have a static public ip address , you have a MX record hosted on your ISP's DNS server which is pointing towards your public IP address etc and you have to telnet port 25 not 24.



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 4:42:02 AM)

No, I don't have a static Public IP. I am using a dynamic address, and as I wrote incoming mail ok. The MX record is hosted on Godaddy.com, my domain provider. And I telneted to port 25, sorry.

If you see no solution, is there a way to reset Active Directory and reinstall the DNS-server. But there must be an explenation why I can only send to the bbse.no domain.



ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 5:26:03 AM)

have you checked your firewall whether it is opening for port 25. When you have telnet what is the error message it is giving there?
how is the mailflow from your domain to destination.
Isolate one by one by like try to avoid firewall and try to telnet with destination ip address.
Check whether your server is listening to port 25.



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 5:36:49 AM)

Hi,

It does not give error message. Just the message I wrote in the first mail. FRom what I have read in other message groups, We should get more than that. Try it yourself on smtp.atledale.com .

The mailflow is dead apart from the bbse.no domain, which I wrote earlier, also belongs to my ISP domain.

It is difficult to avoid the firewall, because that is also my NAT router. I have made a policy in the firewall to allow all protocols going out, as well as just port 25. I notice a rule that says "Drop_SMB_all".



ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 6:16:56 AM)

what is the domain to which you are trying to send email....
can i get the domain name
because i tried to get the query for this domain : smtp.atledale.com
I am getting this result There is no MX record for smtp.atledale.com.
Did i queried wrong domain[:D]



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 6:19:49 AM)

gmail.com

the domain I am sending from is atledale.com

and there must be an mx record, because I am receiving mail to atledale.com



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 6:25:37 AM)

Below are my WAN details. If you ping smtp.atledale.com you will get my WAN-IP. But it is going out that is the problem.

nterface: WAN (DHCP) IP Address: 217.14.11.189 Link status: 10 Mbps full Duplex (autonegotiated)     MAC Address: 000f:3d10:f794 Send rate: 4 kbps Receive rate: 16 kbps   DHCP Status: BOUND Assigned IP: 217.14.11.189 Subnet mask: 255.255.252.0 Broadcast IP: 217.14.11.255 Gateway IP: 217.14.8.1 DNS1: 217.14.0.141 DNS2: 217.14.0.142 DHCPD IP: 217.14.8.1 Leasetime: 21600s
Renew in: 4755s
Rebind in: 12855s
Expire in: 15555s



ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 7:44:24 AM)

Please run EXTRA tool (www.exbpa.com)



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 8:45:19 AM)

Yes, I tried it, and it came out with no errors the first time. However I set the e-mail address to send the deliver report to the one in the bbse.no domain. When I run it again, it does not give me the option to change this to something else. It only asks for server and Global Catalog. Very annoying..Did not help to uninstall, delete all links in the registry and reinstall.

I forgot to tell one thing, however, and that is I am running this in Vmware for Servers 1.03. It is allocated 996 Mb of RAM.



ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 9:30:59 AM)

hi,
Try to message tracking

check the queue
http://www.msexchange.org/tutorials/Exchange-Server-2003-Mailflow-Part-2.html
http://support.microsoft.com/kb/324759



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 9:52:29 AM)

ok, in the meantime...

http://aycu17.webshots.com/image/20816/2000623968258137165_rs.jpg



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 10:14:04 AM)

When I sent a message to the bbse.no domain and the gmail.com domain, this is what is reported in the SMTP-log:

#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2007-06-26 14:10:38
#Fields: time c-ip cs-method cs-uri-stem sc-status
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 EHLO - 0
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 MAIL - 0
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 RCPT - 0
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 DATA - 0
14:10:38 82.209.166.49 - - 0
14:10:39 82.209.166.49 - - 0
14:10:39 82.209.166.49 QUIT - 0
14:10:39 82.209.166.49 - - 0
                               



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 10:16:26 AM)

And I get this error after the long time-out period for all messages failing:

Event Type:    Warning
Event Source:    MSExchangeTransport
Event Category:    Connection Manager
Event ID:    4006
Date:        26.06.2007
Time:        16:12:44
User:        N/A
Computer:    2003ENTAD
Description:
Message delivery to the host '81.191.140.194' failed while delivering to the remote domain  'proact.no' for the following reason: The remote server did not respond to a connection attempt.


For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: d2 02 04 c0               Ò..À   




atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 10:24:47 AM)

Now we are getting somewhere. Below is the error I get when running the SMTP Diag tool:

C:\smtpdiag\SmtpDiag>smtpdiag atledale@atledale.com atle.dale@gmail.com

Searching for Exchange external DNS settings.
Computer name is 2003ENTAD.
VSI 1 has the following external DNS servers:
There are no external DNS servers configured.

Checking SOA for gmail.com.
Checking external DNS servers.
Checking internal DNS servers.
SOA serial number match: Passed.

Checking local domain records.
Checking MX records using TCP: atledale.com.
Checking MX records using UDP: atledale.com.
Both TCP and UDP queries succeeded. Local DNS test passed.

Checking remote domain records.
Checking MX records using TCP: gmail.com.
Checking MX records using UDP: gmail.com.
Both TCP and UDP queries succeeded. Remote DNS test passed.

Checking MX servers listed for atle.dale@gmail.com.
Connecting to gmail-smtp-in.l.google.com [64.233.183.114] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to gmail-smtp-in.l.google.com.
Connecting to gmail-smtp-in.l.google.com [64.233.183.27] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to gmail-smtp-in.l.google.com.
Connecting to alt2.gmail-smtp-in.l.google.com [209.85.147.27] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to alt2.gmail-smtp-in.l.google.com.
Connecting to alt2.gmail-smtp-in.l.google.com [209.85.147.114] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to alt2.gmail-smtp-in.l.google.com.
Connecting to alt1.gmail-smtp-in.l.google.com [72.14.247.27] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to alt1.gmail-smtp-in.l.google.com.
Connecting to gsmtp183.google.com [64.233.183.27] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to gsmtp183.google.com.
Connecting to gsmtp163.google.com [64.233.163.27] on port 25.
Connecting to the server failed. Error: 10060
Failed to submit mail to gsmtp163.google.com.

C:\smtpdiag\SmtpDiag>



atledale -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 11:04:39 AM)

This is my smtp-testing. The mail just stays here...Below is the corresponding SMTP-log. Notice the time is fucked up.

220 2003entad.atles.com Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 rea
dy at  Tue, 26 Jun 2007 16:52:32 +0200
helo
250 2003entad.atles.com Hello [192.168.1.200]
MAIL FROM:ATLEDALE@ATLEDALE.COM
250 2.1.0 ATLEDALE@ATLEDALE.COM....Sender OK
RCPT TO:atle.dale@gmail.com
250 2.1.5 atle.dale@gmail.com
DATA:This is a fucking test!
500 5.3.3 Unrecognized command
DATA:
500 5.3.3 Unrecognized command
Data
354 Start mail input; end with <CRLF>.<CRLF>
This is a fucking test!!!
.
250 2.6.0 <2003ENTAD1kPi6ErhOT00000002@2003entad.atles.com> Queued mail for deli
very



SMTP-log


#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2007-06-26 14:10:38
#Fields: time c-ip cs-method cs-uri-stem sc-status
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 EHLO - 0
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 MAIL - 0
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 RCPT - 0
14:10:38 82.209.166.49 - - 0
14:10:38 82.209.166.49 DATA - 0
14:10:38 82.209.166.49 - - 0
14:10:39 82.209.166.49 - - 0
14:10:39 82.209.166.49 QUIT - 0
14:10:39 82.209.166.49 - - 0
14:26:48 192.168.1.200 HELO - 250
14:27:30 192.168.1.200 helo2 - 500
14:27:33 192.168.1.200 HELO - 250
14:29:56 192.168.1.200 smtp.atledale.com.tld - 500
14:30:10 192.168.1.200 MAIL - 501
14:30:25 192.168.1.200 MAIL - 501
14:30:25 192.168.1.200 MAIL - 501
14:36:52 192.168.1.200 MAIL - 501
14:38:24 192.168.1.200 EHLO - 250
14:39:47 192.168.1.200 HELO - 250
14:40:40 192.168.1.200 MAIL - 501
14:40:40 192.168.1.200 MAIL - 501
14:41:15 192.168.1.200 mail - 500
14:41:37 192.168.1.200 MAIL - 250
14:42:14 192.168.1.200 rcpt - 500
14:42:32 192.168.1.200 RCPT - 250
14:45:13 192.168.1.200 DATA - 250
14:45:44 192.168.1.200 subject: - 500
14:46:38 192.168.1.200 QUIT - 240
14:50:50 192.168.1.200 HELO - 250
14:51:53 192.168.1.200 MAIL - 501
14:52:03 192.168.1.200  - 500
14:52:06 192.168.1.200 QUIT - 240
14:52:35 192.168.1.200 HELO - 250
14:52:57 192.168.1.200 MAIL - 250
14:53:32 192.168.1.200 RCPT - 250
14:54:16 192.168.1.200 data:this - 500
14:54:38 192.168.1.200 data: - 500
14:55:14 192.168.1.200 DATA - 250

I am running out of options now..What do you suggest? Reinstall Exchange? Oh, I am using SP2, by the way for both the 2003 Ent Server and for Exchange 2003 Enterprise Edition.,




ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 6:01:28 PM)

i know i am keeping on posting one by one step...
try to run winroute.exe



ismail.mohammed -> RE: Outgoing mail only routes to ISP domain (26.Jun.2007 6:07:52 PM)

for winroute:

http://technet.microsoft.com/en-us/library/aa996165.aspx

For winroute exe:
http://www.microsoft.com/downloads/details.aspx?FamilyID=C5A8AFBF-A4DA-45E0-ADEA-6D44EB6C257B&displaylang=en

For using this tool:
http://support.microsoft.com/kb/281382



atledale -> RE: Outgoing mail only routes to ISP domain (27.Jun.2007 4:28:16 PM)

hello!

This is the link state data (copied the unformatted data into a txt-file):

NODEINFO (5) {38}Version: 6.5.7638.138.1 Microsoft Routing Server ready

MULTI (5) ({000001e8} ORGINFO_RESPONSE d9273f370ef1ae479c2830d9dd50efa0 a6ada88d5f62096a9758af9cbc0bbaec ( 3de07254bbe4884d8f14711efef3ac67 6bd7a16d546e724b91b0feb1c2ae506b 1 0 5 8ce1795e8ee3cc4a969884831474084b {26}*.3DE07254-BBE4-884D-8F14-711EFEF3AC67 {50}c=US;a= ;p=First Organizati;o=Exchange;cn=3DE07254-BBE4-884D-8F14-711EFEF3AC67;* {5a}/o=First Organization/ou=First Administrative Group/*/3DE07254-BBE4-884D-8F14-711EFEF3AC67 ( 6bd7a16d546e724b91b0feb1c2ae506b YES 1 1dd6 {10}0701000000000101 ) ())  )


If you want I can also send you the Winroute file. I don't understand much of this info.



Page: [1] 2   next >   >>