Exchange Server Forums

Client Access Role - Server could not be found

Users viewing this topic: none

Logged in as: Guest

Printable Version

All Forums >> [Microsoft Exchange 2010] >> Installation >> Client Access Role - Server could not be found

Page: [1]

Message

<< Older Topic Newer Topic >>

Client Access Role - Server could not be found - 30.Jun.2010 4:44:14 AM

shunail

Posts: 5
Joined: 29.Jun.2010
Status: offline

I've installed Hub Transport module so far but when I install Client Access Role, I get the following message

Client Access Role
Failed

Error:
The following error was generated when "$error.Clear(); $thisServer = Get-ExchangeServer $RoleFqdnOrName; $adSiteId = $thisServer.Site; $pureMailboxServersFqdns = Get-ExchangeServer | Where {$adSiteId -eq $_.Site -and $_.IsMailboxServer -and -not $_.IsClientAccessServer} | ForEach {$_.Fqdn}; Get-MailboxDatabase | Where { ($pureMailboxServersFqdns -contains $_.RpcClientAccessServer) -and ($adSiteId -eq (Get-ExchangeServer $_.Server).Site)} | Set-MailboxDatabase -RpcClientAccessServer $thisServer" was run: "The operation couldn't be performed because object <New Exchange Server name>' couldn't be found on '<domain controller name>'.".

The operation couldn't be performed because object '<New Exchange Server name>' couldn't be found on '<domain controller name>'.

PLEASE HELP!!!

I tried running setup /p and that fails too

" A Setup failure previously occurred while installing the ClientAccess role.
Either run Setup again for just this role, or remove the role using Control Panel."

which is not getting installed to begin with!!!

Post #: 1

Featured Links*

RE: Client Access Role - Server could not be found - 30.Jun.2010 6:34:46 AM

Exchange_Geek

Posts: 1287
Joined: 31.Dec.2006
Status: offline

It's cause Exchange does not want to behave like a good boy and does not understand that Client Access Role needs to be installed.

Goto the following link - http://msexchangeteam.com/archive/2007/05/21/439529.aspx
Check out the location of watermarks, go ahead and delete the key Client Access Role (ONLY, please do not delete anything else) on the left hand side.

Reboot the box, and try the installation again.

Regards,
Exchange_Geek

(in reply to shunail)

Post #: 2

RE: Client Access Role - Server could not be found - 30.Jun.2010 9:13:41 AM

shunail

Posts: 5
Joined: 29.Jun.2010
Status: offline

there was no registry entry in the system!!
Also now there's new issue. There's no mailbox in even the old Server 2003!! That's after installing Exchange 2010 where only Hub Transport was installed!

(in reply to Exchange_Geek)

Post #: 3

RE: Client Access Role - Server could not be found - 30.Jun.2010 9:16:43 AM

Exchange_Geek

Posts: 1287
Joined: 31.Dec.2006
Status: offline

Is it possible for you to upload your setup logs please AND the screenshot of the registry location we are talking about.

Regards,
Exchange_Geek

(in reply to shunail)

Post #: 4

RE: Client Access Role - Server could not be found - 30.Jun.2010 11:42:13 AM

shunail

Posts: 5
Joined: 29.Jun.2010
Status: offline

files can be access at
ftp.shunail.com
username: guest@shunail.com
password: issue

Thanks!

(in reply to Exchange_Geek)

Post #: 5

RE: Client Access Role - Server could not be found - 2.Jul.2010 10:08:50 AM

Exchange_Geek

Posts: 1287
Joined: 31.Dec.2006
Status: offline

#########################################################
Please upload your web files to the public_html directory.
Note that letters are case sensitive.
#########################################################

I get this upon hitting the FTP link

Regards,
Exchange_Geek

(in reply to shunail)

Post #: 6

RE: Client Access Role - Server could not be found - 2.Jul.2010 11:20:59 AM

Bhanu

Posts: 11
Joined: 4.Mar.2009
Status: offline

Do we have any mailbox servers in place. ? Any mailbox server that u uninstalled ?
Also run the Best practic analyser from the tool box and see for any critical errors..

(in reply to Exchange_Geek)

Post #: 7